Universal RC Transmitter

Universal RC Transmitter (this is a demo version limited to 3 minutes per connection or control session) provides general and virtually universal remote control capabilities for many technical models such as robots, drones, model cars, model aircraft, etc., as well as RC Simulators for PC.

It allows a wide range of control configurations, allowing to define the number of channels, maximum and minimum byte values for each channel, the general transmission sequence and specific transmission sequences per control element, etc.

Provides control for technical models via:

- TCP / IP (Wifi, 3G, 4G, etc.)

- Bluetooth

- PPM Modulation

* Using the audio output of the Android device connected to an external transmitter or to a RC simulator.

Up to 16 different channels:

- 2 virtual joysticks (2 channels per joystick) with configurable range of values, horizontal and vertical constraints, as well as the possibility of automatic joystick centering in one or both axes.

- 2 control slide bars.

- 10 Buttons that can be configured as:

* ON / OFF type.

* Pushbutton type.

- Proportional Digital Control for each channel.

External Gamepad/Joysticks support through USB or Bluetooth:

- Virtual joysticks can be also controled by Gamepad or external Joysticks as RC transmitters.

- Virtual buttons can be also controlled by Gamepad buttons.

- External Joysticks can be calibrated

The Transmission String or Transmission Sequence can be user defined allowing virtually unlimited channel combinations that can be configured.

Up to 32 different user-defined configurations can be load and save: for example, for different technical models: aircraft, helicopters, boats, robots, etc.

The content of the Transmission Sequence can be seen during operation, as well as to hide it for providing greater speed to the Application.

Ideal for hobbyists as well as students and / or enthusiasts of electronics, engineering, robotics and drones. Therefore its scope is both educational as for the area of the hobbies.

No special permission is required, except for those that are essential for the correct operation of the application:

INTERNET

Required to transmit IP control packets.

ACCESS_WIFI_STATE

Required to calculate the recommended Wi-Fi transmission delay.

BLUETOOTH_ADMIN

BLUETOOTH

Necessary to control devices / models through Bluetooth.

MODIFY_AUDIO_SETTINGS

Required to raise audio volume to the maximum when using the audio port for PPM transmission.

Required to verify that a mini-jack transmission cable has been plugged into the audio port when transmitting PPM frames.

WARNING:

This is a Demo version limited to 3 minutes per connection or control session and only 2 configuration profiles. To install the full version without limitations, read the following section:

FULL VERSION:

To eliminate the limitation of the 3 minutes per connection or control session and the limitation of the only 2 configuration profiles (full version has up to 32 different configuration profiles) of this Demo version, it is necessary to additionally download, install and execute Universal RCT Activator application from Google Play.

Once the Full version has been activated, it is recommended not to delete the Activator: you may need it to reactivate the application if you root the device, do a factory reset, delete the application data, or update the version of your OS Android system.

- The application allows to be used and configured in Spanish or English.

USER MANUAL:

Available in JBDreams Apps's Web site (see web site link below).

Other recommendations:

Better operation in fast Android devices.

Needs Bluetooth, Wifi or Audio. If the Android device lacks any of these features, some functions could not be accessible.

万能遥控器（这是一个演示版本仅限于每个连接或控制会话3分钟）提供了许多技术模型，如机器人，无人驾驶飞机，汽车模型，飞机模型等，一般，几乎万能遥控器功能，以及RC模拟器电脑。

   它允许一个宽范围的控制结构，允许以限定通道，最大和最小的字节值的数目为每个信道，一般发送序列和每个控制元件的特定传输序列等

提供了通过技术模型控制：

- TCP / IP（WIFI，3G，4G等）

- 蓝牙

- PPM调制

*使用连接到外部发射器或一个RC模拟器Android设备的音频输出。

多达16个不同的渠道：

- 2虚拟操纵杆（每个操纵杆2通道）与值，水平和垂直的约束可配置范围，以及自动操纵杆中的一个或两个轴定心的可能性。

- 2控制滑动条。

- 10按钮可以被配置为：

* ON / OFF类型。

*按钮类型。

- 每个通道的比例数字控制。

外部手柄/操纵杆通过USB或蓝牙支持：

- 虚拟操纵杆可以通过手柄或外部操纵杆RC作为发射器也被控制。

- 虚拟按钮，可以通过手柄按键进行控制，也。

- 外部操纵杆可以被校准

   传输字符串或传输序列可以是用户定义允许可配置几乎无限的信道的组合。

   多达32种不同的用户定义的配置可以加载和保存：例如，针对不同的技术模型：飞机，直升机，船舶，机器人等。

   传输序列的内容可以在操作过程中可以看出，以及将其隐藏用于向应用程序提供了更大的速度。

   非常适合业余爱好者以及学生和/或电子，工程，机器人和无人驾驶飞机爱好者。因此，其范围是既教育作为爱好的面积。

没有特别许可是必需的，但对于那些应用程序的正常运行至关重要：

互联网

需要传输IP控制报文。

ACCESS_WIFI_STATE

需要计算建议的Wi-Fi传输延迟。

BLUETOOTH_ADMIN

蓝牙

必须通过蓝牙来控制设备/型号。

许可权

需要使用音频端口PPM的传输时提高音量到最大。

需要验证发射PPM帧当一个迷你插孔传输电缆已插入的音频端口。

警告：

   这是限制每个连接或控制会话3分钟，只有2配置配置文件的演示版。要安装完整版没有限制，阅读以下部分：

完整版：

   为了消除每个连接或控制会话的3分钟的限制，唯一的2配置的配置文件的这个演示版本的限制（完整版有多达32种不同的配置配置文件），它需要另外下载，安装和执行通用RCT从谷歌播放激活应用程序。

   一旦完整版已被激活，建议不要删除激活：你可能需要重新激活该应用程序，如果你根设备，恢复出厂设置，删除应用程序数据，或更新您的操作系统的Android系统的版本。

- 应用程序允许使用并在西班牙语或英语配置。

用户手册：

   可在JBDreams应用程序的网站（见下面的网站链接）。

其它建议：

   在快速的Android设备比较好操作。

   需要使用蓝牙，WiFi或音频。如果Android设备没有任何功能，有些功能可能无法访问。